Monarques Gold Intersects 43.25 g/t Au over 2.1 Metres and 25.92 g/t Au over 3.4 Metres on its Croinor Gold Project

Continuous strong results warrant an additional 8,300 metres of drilling

MONTREAL, Oct. 4, 2018 /CNW/ – MONARQUES GOLD CORPORATION (« Monarques » or the « Corporation ») (TSXV:MQR.V – News) (OTCMKTS:MRQRF – News) (FRANKFURT:MR7.F – News) is pleased to report additional assay results from the 2018 diamond drilling program at its wholly owned Croinor Gold project 50 kilometres east of Val-d’Or, Québec. The initial 20,000-metre program started in March 2018 and focused on the expansion and infilling of the Croinor Gold deposit. The program was completed in early September with a total of 19,935 metres of core drilled in 89 holes. Drilling continued with one rig on the property and a second drill was added on September 17 to drill an additional 8,300 metres before the winter freeze.

The Phase 3 results are from a total of 6,790 metres of drilling in 36 holes (see longitudinal view). Assays have been received for 77 of the 89 holes drilled and logged (see table below and press releases dated July 10, 2018 and September 5, 2018).

The first 25 holes in the table below are from the two areas targeted for bulk sampling, on the 125-foot level and the 250-foot level of the old mine workings. These holes are infill and contour drill holes for the two zones, with a grid spacing of 10 metres by 10 metres, considering historical holes and holes drilled previously by Monarques. Hole CR-18-636 returned 43.25 g/t Au over 2.1 metres, including 88.60 g/t Au over 1.0 metre in the 125-foot level bulk sample area, and Hole CR-18-647 returned 25.92 g/t Au over 3.4 metres in the 250-foot level bulk sample area. Both these holes have increased the volume of ore planned to be mined. New wireframes for each area are being completed by an external consultant.

Near-mine exploration drilling has consistently returned positive results, with 8 of the 11 holes returning economic assays. Hole CR-18-653, drilled 41 metres up plunge from the nearest planned stope, returned 22.00 g/t Au over 1.1 metres, indicating that the gold system is still open to the west. Hole CR-18-649 is a down dip hole drilled into the host diorite to test the deposit at depth and returned 9.59 g/t Au over 1.0 metre, indicating that the deposit is still open at depth.

« We continue to be impressed by these high-grade results on Croinor Gold, which prompted us to drill an additional 8,300 metres, » said Jean-Marc Lacoste, President and Chief Executive Officer of Monarques. « The success of our 2018 drilling program also shows that we have a better understanding of the deposit. This supplementary 8,300-metre drilling program is designed to pass between the planned stopes, where there are no drill results, to increase the tonnage in the Croinor Gold deposit before mining starts, and to drill around the periphery of the deposit to follow up on positive assay results to extend the resource to the west, where it is still open. As I have said before, we believe that the Croinor Gold discovery potential remains essentially untapped. »

Phase 3 drill results from the Croinor Gold project

Hole Length From To Width* Grade Area
Number (m) (m) (m) (m) (g/t Au) Targeted**
CR-18-623 46 42.8 43.3 0.5 0.06 125
CR-18-624 219 64.6 66.0 1.4 2.87 250
CR-18-625 130 94.2 95.1 0.9 0.68 125
CR-18-626 40 21.8 22.9 1.1 0.42 125
CR-18-627 136 93.7 94.9 1.2 5.86 125
CR-18-628 85 77.5 78.4 0.9 0.74 250
CR-18-629 121 25.0 26.0 1.0 2.26 125
CR-18-630 91 71.1 72.3 1.2 6.38 250
CR-18-631 187 66.5 67.2 0.7 7.11 250
72.7 74.7 2.0 5.91
CR-18-632 151 26.8 27.8 1.0 4.27 125
CR-18-633 103 77.0 78.0 1.0 23.20 250
CR-18-634 193 131.8 132.2 0.5 2.13 125
CR-18-635 226 76.5 77.5 1.0 1.80 250
CR-18-636 46 34.0 36.1 2.1 43.25 125
Including 34.0 35.0 1.0 88.60
CR-18-637 163 24.9 28.2 3.3 5.42 125
Including 27.0 28.2 1.2 11.20
CR-18-638 154 104.0 109.0 5.0 11.20 125
Including 104.0 105.1 1.1 21.60
Including 108.1 109.0 0.9 35.20
CR-18-639 85 69.2 70.2 1.0 8.69 250
75.2 77.3 2.1 4.83
Including 75.2 76.2 1.0 7.48
CR-18-640 85 72.7 76.0 3.3 4.40 250
CR-18-641 172 103.0 104.3 1.3 7.35 125
CR-18-642 40 32.8 34.0 1.2 0.21 250
CR-18-643 70 30.2 31.4 1.2 0.64 250
CR-18-644 76 60.6 61.8 1.2 5.39 250
CR-18-645 222 68.0 70.0 2.0 4.55 250
CR-18-646 82 53.5 54.8 1.3 1.34 250
CR-18-647 199 61.5 64.9 3.4 25.92 250
CR-18-648*** 760 155.9 159.7 3.8 4.62 NME
CR-18-649*** 751 528.2 531.5 3.3 3.96 NME
Including 529.4 530.4 1.0 9.59
CR-18-650 250 126.1 127.0 0.9 17.35 NME
199.0 201 2.0 7.41
CR-18-651 241 189.3 193.2 3.9 4.39 NME
Including 190.3 191.3 1.0 8.23
200.3 203.4 3.1 9.86
Including 202.2 203.4 1.2 21.10
CR-18-652 271 182.1 183.3 1.2 12.20 NME
198.6 199.6 1.0 5.67
CR-18-653 262 193.1 194.2 1.1 22.00 NME
204.4 205.3 0.9 4.45
CR-18-654 202 112.0 114.4 2.4 1.19 NME
CR-18-655 250 170.3 171.1 0.8 3.13 NME
CR-18-656 202 140.7 141.8 1.1 5.23 NME
177.2 181.6 4.4 7.45
Including 177.2 178.3 1.1 17.70
CR-18-657 220 130.8 132.5 1.7 7.93 NME
CR-18-658 259 116.3 117.2 0.9 1.20 NME
* The width shown is the core length. True width is estimated to be 90-95% of the core length.
** 125=125 Foot Level Bulk Sample; 250=250 Foot Level Bulk Sample; NME=Near Mine Exploration.
*** Holes CR-18-648 and CR-18-649 were drilled down dip, parallel to the diorite, to test for the presence of multiple directions of quartz veining. The width shown is the core length. True width is estimated to be 30-35% of the core length.

Sampling normally consists of sawing the core into two equal halves along its main axis and shipping one of the halves to the ALS Minerals laboratory in Val-d’Or for assaying. The samples are crushed, pulverized and assayed by fire assay with atomic absorption finish. Results exceeding 3.0 g/t are re-assayed using the gravity method, and samples containing gold grains are assayed using the metallic sieve method. Monarques uses a comprehensive QA/QC protocol, including the insertion of standards, blanks and duplicates.

The technical and scientific content of this press release has been reviewed and approved by Ronald G. Leber, P.Geo., the Corporation’s qualified person under National Instrument 43-101.

ABOUT MONARQUES GOLD CORPORATION

Monarques Gold Corporation (TSXV:MQR.V – News) is an emerging gold mining company focused on pursuing growth through its large portfolio of high-quality projects in the Abitibi mining camp in Quebec, Canada. The Corporation currently owns close to 300 km² of gold properties (see map), including the Wasamac deposit (measured and indicated resource of 2.6 million ounces of gold), the Beaufor Mine, the Croinor Gold (see video), McKenzie Break and Swanson advanced projects and the Camflo and Beacon mills, as well as five promising exploration projects. It also offers custom milling services out of its 1,600 tonne-per-day Camflo mill.

Forward-Looking Statements

The forward-looking statements in this press release involve known and unknown risks, uncertainties and other factors that may cause Monarques’ actual results, performance and achievements to be materially different from the results, performance or achievements expressed or implied therein. Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this press release.

SOURCE Monarques Gold Corporation