Cascabel Exploration Update – Over 100km of Additional Drilling Since Maiden Mineral Resource Estimate to Provide Stronger Resource Base at Alpala

OTTAWA, Aug. 22, 2018 (GLOBE NEWSWIRE) — Cornerstone Capital Resources Inc. (“Cornerstone” or “the Company”) (CGP.V) (GWN.F) (GWN.BE) (CTNXF) is pleased to announce the following update on the exploration program at its Cascabel copper-gold porphyry joint venture exploration project in northern Ecuador, in which the Company has a 15% interest financed through to completion of a feasibility study, plus 10% of the shares of joint venture partner and project operator SolGold Plc, for a total direct and indirect interest in Cascabel of approximately 23%.

Figures referred to in this news release can be seen in PDF format by accessing the version of this release on the Company’s website (www.cornerstoneresources.com) or by clicking on the link below:

http://www.cornerstoneresources.com/i/pdf/NR18-25Figures.pdf.

HIGHLIGHTS:

  • Hole 41-D1-D2 (Alpala Central Infill Drilling): 
    • 582m (true width 233m) @ 1.18% copper equivalent (“CuEq”1)  (0.64% Cu, 0.85g/t Au) (from 1048m depth), incl.
    • 340m (true width 136m) @ 1.54% CuEq (0.78% Cu, 1.21g/t Au) (from 1172m depth.
  • Hole 63 (Alpala Extension Drilling, Western lobe): thus far over 170m of copper sulphide mineralization.  Drilling continues.
  • Hole 58-D1 (Alpala Extension Drilling, NW margin): thus far over 640m of copper sulphide mineralization.  Drilling continues.
  • Hole 55R-D1 (Alpala Extension Drilling, NW margin): thus far over 480m of copper sulphide mineralization.  Drilling continues.
  • Hole 62 (Alpala Extension Drilling, East margin): approximately 400m of visible copper sulphide mineralization.  Assay results pending.
  • Hole 65 currently encountering strong mineralization from 762m depth to 832m depth on the Western lobe.  Drilling continues.

FURTHER INFORMATION:

Cascabel is located in northwestern Ecuador in an under-explored northern section of the Andean Copper Belt, 60 km northeast of the undeveloped inferred resource of 982 million tons at 0.89% Cu Llurimaga (formerly Junin) copper project2 (Figure 1).

A maiden Mineral Resource Estimate (MRE) for the Alpala deposit, estimated from the initial 53,616m of drilling, was announced on January 3, 2018 (see Cornerstone news release 18-01 on that date) and the corresponding Technical Report prepared by SRK Exploration Services Ltd. and qualified persons James Gilbertson, Martin Pittuck, and John Willis in compliance with National Instrument 43-101 was filed at www.sedar.com on  February 16, 2018 (http://www.cornerstoneresources.com/i/pdf/AlpalaMRE_0218.pdf), and indicates resources of: 430Mt @ 0.8% CuEq Indicated and 650Mt @ 0.6% CuEq Inferred (3.4 Mt CuEq Indicated 4.0 Mt CuEq Inferred) at 0.3% CuEq cut off, for a metal inventory of 2.3 Mt Cu and 6.0 Moz Au Indicated and 2.9 Mt Cu and 6.3 Moz Au Inferred, including a high-grade core of 70Mt @ 1.8% CuEq Indicated (1.2Mt CuEq) and 50Mt @ 1.8% CuEq Inferred (0.8 Mt CuEq) at a 1.1% CuEq cut off.  A further 50 Mt @ 1.0% CuEq Indicated (1.0 Mt CuEq) and 50 Mt @ 1.0% CuEq Inferred (1.0 Mt CuEq) is added to the high grade core if a 0.9% CuEq cut off is used, giving a high grade core of 220 Mt at a weighted average grade of 1.44% CuEq.

A further 83,000m of drilling has been completed (of which assays are outstanding for approximately 7,800m) since development of the maiden MRE (Figure 2), and major resource growth is expected in a revised MRE.  JV partner and project operator SolGold believes that assay results from infill and extension drilling at Alpala Central substantiate the existence of a larger and more robust high-grade core than estimated in the MRE.  Recent drilling shows that early stage diorite and quartz diorite intrusions, relatively richer in copper and gold, are far more continuous than previously modeled.

Figure 3 is a core photo from Hole CSD-18-065 showing the intersection of a D10 Diorite containing moderate Act-propylitic alteration overprinted by weak Argillic alteration.

An updated Mineral Resource Estimate is expected to provide a significantly greater resource base for the project upon completion of approximately 17,000m of planned drilling.

SolGold is encouraged by mineralization, high grade being encountered in drilling across the western lobe of Alpala, lying in an elevated position, adjacent to the high grade core, while extension drilling along the northwest and east margins of the Alpala deposit continue to add growth to the overall extent of mineralization.

Drill hole assays have been received for 113,800m of a total 136,600m on the project.  Approximately 7,800m of drilling has assays pending, with 15,000m accounted for as non-assayed top access holes.

Highlights of assay results expected to add to the existing MRE at Alpala are shown in the below table:

                   
Hole ID DepthFrom  
m
DepthTo  
m
Interval  
m
True width 
m
Cu
%
Au
g/t
CuEq
%
Cut-off
(CuEq%)
Comment
CSD-17-030 658 1158 500 200.0 0.55 0.25 0.71 0.50  
CSD-17-030 904 1048 144 57.6 0.72 0.33 0.93 0.70  
CSD-17-033 736 1560 824 329.6 0.54 0.42 0.80 0.30 Announced 824m @ 0.80% CuEq, incl. 576m @ 0.93% CuEq.
CSD-17-033 850 1426 576 230.4 0.61 0.51 0.93 0.40  
CSD-17-033 1218 1388 170 68.0 0.81 1.07 1.48 0.70  
CSD-17-033-D1 732 1336 604 241.6 0.51 0.34 0.73 na  
CSD-17-033-D1 1040 1186 146 58.4 1.09 0.99 1.71 0.30  
CSD-17-036 1398 2004.7 606.7 242.7 0.45 0.25 0.61 0.20 bulk, halo
CSD-17-036 1490 1844 354 141.6 0.59 0.34 0.81 0.30  
CSD-17-037 1380 2222 842 336.8 0.35 0.15 0.44 0.20  
CSD-17-037 1644 1842 198 79.2 0.55 0.30 0.74 0.40  
CSD-18-041-D1 998 1754 756 302.4 0.53 0.47 0.82 0.30  
CSD-18-041-D1 1282 1668 386 154.4 0.70 0.79 1.19 0.50  
CSD-18-041-D1 1346 1598 252 100.8 0.86 1.07 1.53 1.00  
CSD-18-041-D1-D1 1017.9 1449 431.1 172.4 0.41 0.24 0.56 0.30  
CSD-18-041-D1-D1 1202 1449 247 98.8 0.45 0.33 0.65 na open at depth
CSD-18-041-D1-D2 926 1779 853 341.2 0.52 0.62 0.91 0.20 open at depth, results below 1438m pending
CSD-18-041-D1-D2 1048 1630 582 232.8 0.64 0.85 1.18 0.30 open at depth, results below 1438m pending
CSD-18-041-D1-D2 1112 1630 518 207.2 0.68 0.93 1.27 0.40 open at depth, results below 1438m pending
CSD-18-041-D1-D2 1172 1512 340 136.0 0.78 1.21 1.54 na  
CSD-18-041-D1-D2 1310 1456 146 58.4 1.04 2.03 2.32 1.00 open at depth, results below 1438m pending
CSD-18-042 448 1176 728 291.2 0.75 0.50 1.06 0.30  
CSD-18-042 620 1124 504 201.6 0.92 0.58 1.28 0.40  
CSD-18-042 718 1106 388 155.2 1.01 0.68 1.44 0.50  
CSD-18-042 840 1094 254 101.6 1.23 0.81 1.78 0.70  
CSD-18-042-D2 312 1110 798 319.2 0.32 0.24 0.47 0.10 bulk, halo.
CSD-18-042-D2 312 614 302 120.8 0.45 0.50 0.76 0.20  
CSD-18-042-D2 312 538 226 90.4 0.62 0.54 0.96 na  
CSD-18-043 636 1534 898 359.2 0.51 0.40 0.76 0.30  
CSD-18-043 932 1410 478 191.2 0.64 0.61 1.02 0.50  
CSD-18-043 1090 1408 318 127.2 0.70 0.73 1.16 0.70  
CSD-18-043 1108 1268 160 64.0 0.90 1.06 1.56 1.00  
CSD-18-048 530 747.8 217.8 87.1 0.50 0.23 0.65 0.30 open at depth
CSD-18-048 524 620 96 38.4 0.62 0.39 0.86 0.50  
CSD-18-049 850 1700 850 340.0 0.49 0.28 0.66 0.10  
CSD-18-049 872 1316 444 177.6 0.60 0.38 0.83 0.30  
CSD-18-049 882 1150 268 107.2 0.77 0.56 1.12 0.60  
CSD-18-049 890 1010 120 48.0 1.01 0.88 1.57 1.00  
CSD-18-051 714 1408 694 277.6 0.43 0.28 0.61 0.20  
CSD-18-051 826 1302 476 190.4 0.53 0.36 0.75 0.30  
CSD-18-051 1084 1278 194 77.6 0.81 0.74 1.28 0.40  
CSD-18-051 1226 1278 52 20.8 1.94 2.48 3.51 0.50  
CSD-18-055R 542 1790 1248 499.2 0.61 0.45 0.90 0.10  
CSD-18-055R 542 1604 1062 424.8 0.69 0.52 1.02 0.20  
CSD-18-055R 1042 1590 548 219.2 0.86 0.80 1.36 0.30  
CSD-18-055R 1306 1526 220 88.0 1.22 1.34 2.07 0.60  
CSD-18-057 556 1388 832 332.8 0.72 1.10 1.41 0.30  
CSD-18-057 814 1376 562 224.8 0.85 1.37 1.72 0.40  
CSD-18-057 892 1196 304 121.6 1.15 2.18 2.52 1.00  
CSD-18-057 1004 1186 182 72.8 1.49 3.14 3.46 1.50  
CSD-18-058 722 1644 922 368.8 0.47 0.26 0.63 0.30  
CSD-18-058 1040 1288 248 99.2 0.72 0.51 1.04 0.70  
CSD-18-058 1140 1264 124 49.6 0.86 0.59 1.23 1.00  
CSD-18-058 1270 1346 76 30.4 0.53 0.28 0.71 0.50  
CSD-18-060 796 1122 326 130.4 0.84 0.37 1.08 0.10  
CSD-18-060 802 996 194 77.6 1.28 0.54 1.61 0.30  
CSD-18-060 814 976 162 64.8 1.45 0.61 1.84 0.50  
CSD-18-060 886 976 90 36.0 1.97 0.89 2.53 1.00  

Data Aggregation Method: 
Intercepts reported using copper equivalent cutoff grades with up to 10m internal dilution, excluding bridging to a single sample. Minimum intersection length 50m. Gold Conversion Factor of 0.63 calculated from a copper price of US$3.00/lb and a gold price US$1300/oz.  True widths of downhole interval lengths are estimated to be approximately 25% to 50%.
                   

Aguinaga Drilling Program

Aguinaga drilling is progressing with Hole 11 under way.  The drilling program at Aguinaga is in its early stages. As drilling progresses, the geometry and extent of mineralization is becoming more apparent, and SolGold geologists believe potential exists for ongoing discoveries through further drilling.

A more detailed update on the Aguinaga drilling program will be forthcoming as assay results are received and initial interpretation work matures.

About the Cascabel Joint Venture with SolGold:

Exploraciones Novomining S.A. (“ENSA”), an Ecuadorean company owned by SolGold Plc and Cornerstone, holds 100% of the Cascabel concession. Subject to the satisfaction of certain conditions, including SolGold’s fully funding the project through to feasibility, SolGold Plc will own 85% of the equity of ENSA and Cornerstone will own the remaining 15% of ENSA. SolGold is funding 100% of the exploration at Cascabel and is the operator of the project. SolGold shall receive 90% of Cornerstone’s distribution of earnings or dividends from ENSA to which Cornerstone would otherwise be entitled until such time as the amounts so received equal the aggregate amount of expenditures incurred by SolGold that would have otherwise been payable by Cornerstone, plus interest thereon from the dates such expenditures were incurred at a rate per annum equal to LIBOR plus 2 per cent until such time as SolGold is fully reimbursed.

Logging, sampling, assaying and reporting

Holes referred to in this release were or are being drilled using HTW, NTW, NQ and BQ core sizes (respectively 7.1, 5.6, 4.8 and 3.7 cm diameter). Geotechnical measurements such as core recovery, fracturing, rock quality designations (RQD’s), specific gravity and photographic logging are performed systematically prior to assaying. The core is logged, magnetic susceptibility measured and key alteration minerals identified by experienced loggers and sometimes using an on-site portable spectrometer. Core is then sawed in half at the ENSA core logging facility, and half of the core is delivered by ENSA employees for preparation at ALS Minerals Laboratories (ALS) sample preparation facility in Quito. Core samples are prepared crushing to 70% passing 2 mm (10 mesh), splitting 250 g and pulverizing to 85% passing 75 microns (200 mesh) (ALS code CRU-31, SPL21 and PUL-32). Prepared samples are then shipped to ALS in Lima, Peru where samples are assayed for a multi-element suite (ALS code ME-MSP61, 1g split, 4-acid digestion, ICP-MS finish). Over limit results for Ag (> 100 g/t) and Cu, (> 1%) are systematically re-assayed (ALS code Ag-AA62, 4-acid digestion, AAS finish). Gold is assayed using a 30 g split, Fire Assay (FA) and AA finish (ALS code Au-AA23).

Quality assurance / Quality control (QA/QC)

The ALS Laboratory is a qualified assayer that performs and makes available internal assaying controls. Duplicates, certified blanks and standards are systematically used (1 control sample every 15-20 samples). Rejects, a 100 g pulp for each core sample and the remaining half-core are stored for future use and controls.

Qualified Person:

Yvan Crepeau, MBA, P.Geo., Cornerstone’s Vice President, Exploration and a qualified person in accordance with National Instrument 43-101, is responsible for supervising the exploration program at the Cascabel project for Cornerstone and has reviewed and approved the information contained in this news release.

About Cornerstone:

Cornerstone Capital Resources Inc. is a mineral exploration company with a diversified portfolio of projects in Ecuador and Chile, including in the Cascabel gold-enriched copper porphyry joint venture in north west Ecuador.

Pending Plan of Arrangement:

TSXV approval is still pending in respect of the plan of arrangement to spinoff Cornerstone Exploration Inc., first announced on July 13, 2017. The plan of arrangement received shareholder approval in December 2017 and court approval in January 2018.  The Company will put out an update promptly following TSXV approval.

Pursuant to the plan of arrangement, Cornerstone will spin off into a new company called Cornerstone Exploration Inc., all of Cornerstone’s assets except for its interest in the Cascabel concession in Ecuador, shares of SolGold plc and the joint venture with Ecuadorian state mining company ENAMI EP. Cornerstone Exploration will own the drill ready Bella Maria, Shyri NW (Vetas Grandes) and Bramaderos properties in Ecuador, an option to own 100% of the drill ready Caña Brava property in Ecuador, the applications for new properties in Ecuador made by Cornerstone subsidiary La Plata Minerales S.A., the Miocene property in Chile, and Cornerstone’s generative exploration databases for Ecuador and Chile.  Cornerstone will be re-named Cascabel Gold & Copper Inc.

Further information is available on Cornerstone’s website: www.cornerstoneresources.com and on Twitter. For investor, corporate or media inquiries, please contact:

Investor Relations:
Mario Drolet (Montreal); Email: Mario@mi3.ca;
Tel. (514) 346-3813

Corporate Matters: Sabino Di Paola, CFO (Ottawa); Email: sdipaola@cornerstoneresources.ca;
Tel. (343) 689-0714

Due to anti-spam laws, many shareholders and others who were previously signed up to receive email updates and who are no longer receiving them may need to re-subscribe at http://www.cornerstoneresources.com/s/InformationRequest.asp

Cautionary Notice:
This news release may contain ‘Forward-Looking Statements’ that involve risks and uncertainties, such as statements of Cornerstone’s plans, objectives, strategies, intentions and expectations.  The words “potential,” “anticipate,” “forecast,” “believe,” “estimate,” “expect,” “may,” “project,” “plan,” and similar expressions are intended to be among the statements that identify ‘Forward-Looking Statements.’  Although Cornerstone believes that its expectations reflected in these ‘Forward-Looking Statements’ are reasonable, such statements may involve unknown risks, uncertainties and other factors disclosed in our regulatory filings, viewed on the SEDAR website at www.sedar.com.  For us, uncertainties arise from the behaviour of financial and metals markets, predicting natural geological phenomena and from numerous other matters of national, regional, and global scale, including those of an environmental, climatic, natural, political, economic, business, competitive, or regulatory nature.  These uncertainties may cause our actual future results to be materially different than those expressed in our Forward-Looking Statements.  Although Cornerstone believes the facts and information contained in this news release to be as correct and current as possible, Cornerstone does not warrant or make any representation as to the accuracy, validity or completeness of any facts or information contained herein and these statements should not be relied upon as representing its views after the date of this news release.   While Cornerstone anticipates that subsequent events may cause its views to change, it expressly disclaims any obligation to update the Forward-Looking Statements contained herein except where outcomes have varied materially from the original statements.

On Behalf of the Board,
Brooke Macdonald
President and CEO

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

____________________________

1 All references in this news release to copper equivalent (CuEq) grades are composed of copper and gold values, calculated using a gold conversion factor of 0.63, determined using an updated copper price of USD3.00/pound and an updated gold price of USD1300/ounce.  True widths of down hole intersections are estimated to be approximately 25-50%.

2 0.4% Cu cut-off grade; Micon International Co. Ltd. Technical Report for Ascendant Exploration SA, August 20, 2004, pages 28 & 29. Mineralization identified at the Llurimaga copper project is not necessarily indicative of the mineralization on the Cascabel Property.